Der E-Maxx von Traxxas ist der ultimative 4x4 Monstertruck

*geht nur im Betrieb mit 3S LiPo 11.1V Batterien (2x).

Traxxas TSM - Traxxas Stability Management

No one loves over-the-top power more than Traxxas! Our engineers added extreme 6S LiPo power to the proven strength and reliability of the E-Maxx to create the E-Maxx Brushless Edition. The MXL-6s ESC sends over 25 volts of supercharged power to the 2200kV brushless motor for 65+mph speeds (using 3s LiPo batteries). Traxxas Stability Management^® (TSM) keeps E-Maxx stable at speed, while still leaving you in charge. E-Maxx retains its plush long-travel suspension for taming the toughest trails and waterproof electronics keep the fun going even when the trail turns muddy or wet. It's time you experienced monster truck action the Traxxas way! Bold, tough, and insanely overpowered-that's the E-Maxx Brushless Edition!

MXL-6s Brushless Power System
Built specifically to handle the rigors of large, power-hungry trucks, the waterproof MXL-6s electronic speed control is ready for 6S LiPo power with its massive 6.5mm gold-plated connectors, high-efficiency heatsink, integrated cooling fan and heavy-duty components. The speed control sends its power pulses to a 2200kV, 75mm motor, designed specifically for maximum performance and reliability with 6S LiPo power in torque-hungry applications. The aluminum motor can is machined to act as a massive heatsink, high-grade bearings deliver maximum efficiency, and high-strength Neodymium magnets give E-Maxx Brushless Edition outrageous torque. To resist the twist, a beefy 5mm shaft transfers power to the Brushless-Ready transmission.

Sealed Electronics extends your driving fun
Only Traxxas lets you experience 4WD excitement year-round, no matter what Mother Nature has to offer. Water, mud, and snow don't slow down the E-Maxx; its electronic speed control, receiver box, and high-torque digital steering servos are all waterproof for worry-free fun in wet conditions that send other trucks back to the workbench. Drive the E-Maxx where you want, when you want-the only limit is your imagination.

Leading The Way
E-Maxx Brushless Edition (model #39086-4) comes fully-assembled and Ready-To-Race^® with the TQi 2.4GHz radio system with Traxxas Stability Management Traxxas™, Self-Righting, MXL-6s brushless power system, a painted and decaled body, pre-glued tires, and Quick Start Guide. Traxxas backs the E-Maxx Brushless Edition and all of our products with top-notch support that is second to none. A staff of skilled representatives is on-hand to answer your questions via phone, website, or e-mail. Unmatched parts support allows E-Maxx Brushless Edition to be serviced with parts and support from thousands of hobby dealers worldwide. Traxxas goes the extra mile to ensure that your R/C experience is easy and fun (and fast!). Follow the details link above to go in depth on all the E-Maxx Brushless Edition performance benefits and also be sure to check out the videos page to see E-Maxx Brushless Edition in action for yourself.

Der E-Maxx von Traxxas bietet die Möglichkeit die maximale Geschwindigkeit Ihrem Skill-Level anzupassen

Features

• MXL-6s waterproof electronic speed control
  • 6.5mm gold-plated connectors
  • Integrated cooling fan
  • Heavy-duty construction
• 2200kV brushless motor
  • Machined heatsink can
  • 5mm rotor shaft
• TQi 2.4GHz radio system with Traxxas Stability Management^®
  • TQi 2.4GHz high-output transmitter
  • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models-just switch on and drive, "model selection" is not required
  • Multi-Function knob
  • Adjustable steering and throttle percentage (dual rates)
  • Adjustable steering and throttle sensitivity (exponential)
  • Adjustable steering and throttle end points
  • High 13ms frame rate and near-zero latency for responsive control
  • Telemetry-ready 5-channel micro receiver with dual channel-1 input
  • TQi 2.4GHz 5-channel micro receiver (#6533) with fail-safe security and integrated telemetry ports
• Traxxas Stability Management
• Adjustable four-position wheelie bar
• Brushless transmission with metal center idler gear
• Heavy-duty 17mm splined aluminum hex hubs and wheel nuts
• Tunable sealed differentials in Maxx^® differential housings
  • Backward compatible to all Maxx models
  • Differential uses Revo^®-Spec gears and components
• Revo^®-Spec front, rear, and center driveshafts
• Heavy-duty Brushless Ready™ transmission
  • Over two-times stronger than original E-Maxx transmission
  • Steel idler gear
  • Optional accessory two-speed adjustable ratio gear sets
  • Close ratio or wide ratio for super-low first gear
    • Available accessory single motor mount and gear cover
  • Revo^®-Spec Torque-Control™ slipper clutch
  • Quick release, battery hold down straps
    • Reversible to accept stick packs and side-by-side packs
    • Available accessory battery strap for oversized battery packs (sold separately)
  • Long wheelbase, low center-of-gravity chassis increases stability
    • Extended by 30mm
    • Accepts 6-cell or 7-cell flat battery packs and LiPo packs of similar size
    • Batteries sit lower in the chassis for lower CG
    • Lower skid plate protects the center driveline while allowing quick access to the transmission
  • Dual digital waterproof steering servos deliver 125 oz-in of torque & 0.16-sec transit time
  • Precision hex hardware throughout
  • 6.3" diameter Maxx tires pre-glued on black-chrome Split-Spoke wheels
  • Two-piece gear cover makes it easy to access and change gearing
    • Requires removal of only one screw for access
  • Sealed pivot balls and front/rear outer driveshafts
  • Eight fully-adjustable, coil-over Ultra Shocks
  • Integrated dual servo bellcrank and servo saver
  • Watertight sealed receiver box
  • 100% captured steering and toe linkage
    • Double-shear components capture and secure all rod ends for unmatched durability
    • Rear toe-links are captured by a thick tie-bar for double-shear strength
  • Updated shock towers and adjustable body mounts
  • Gray composite components
    • Chassis, skid plates, bulkheads, shock bodies, spur gear cover
  • Precision rubber-sealed ball bearings
  • Blue-anodized aluminum antenna crimp nut
  • Fully painted, trimmed, and decaled ProGraphix^® body

Technische Details

Skill-Level
Fortgeschrittene/Profis

Einsatzgebiet
Outdoor

Lieferumfang
- Traxxas E-Maxx Brushless 4WD 1:10 ARTR
- Farbe: Rot
- Qualitäts Werkzeug
- Schnellstart Anleitung

Benötigtes Zubehör
- Akku
- Ladegerät
- Senderbatterien

Flyer Traxxas E-Maxx 39086-4
/shop/ProdukteDetails/Traxxas E-Maxx 39086-Flyer-Modellmarkt24.pdf

Anleitung Traxxas E-Maxx 39086-4
/shop/ProdukteDetails/Traxxas E-Maxx 39086-Anleitung-Modellmarkt24.pdf

Ersatzteilliste und Explosionszeichnung Traxxas E-Maxx 39086-4
/shop/ProdukteDetails/Traxxas E-Maxx 39086-Ersatzteilliste-Modellmarkt24.pdf