ReglerE-Flite Brushless ESC

E-Flite Regler 30A Brushless PRO mit S-BEC (V2)

Artikel-Nr.: 04235-18811
Hersteller: E-Flite , Hersteller Artikel-Nr.: EFLA1030B
Lager: Lager
CHF 64.57

Beschreibung

Overview

The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Key Features

  • Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
  • 3.5A continuous current, 5V Switch-Mode BEC Circuit
  • Stronger BEC for support of most 3-axis stabilization systems
  • Drive up to 7 analog or 6 digital standard-size servos with the BEC
  • 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing - 5 user-selectable ranges for use with a large variety of brushless motors
  • Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

Technische Daten
- Kontinuierlicher Strom: 30A
- Burst: 35A
- Länge: 51mm
- Breite: 28mm
- Höhe: 8.7mm
- Gewicht: 31g
- Zellen LiXX: 3-4S
- Zellen NiXX: 9-12
- Swich-BEC: 3.5A/5V
- Eingansspannung: 10.8-14.8V
- Batteriekabel: 16AWG mit EC3
- Motorkabel: 16AWG mit 3.5mm Gold-Stecker



Hersteller